Customized high quality compress molding silicon cover

Compression Molding is a process that put the powder, granular or fibrous plastic into the mold cavity with temperature, and then close the mold pressure to make it forming and curing operations. Molding can be used for thermosetting plastics, thermoplastics and rubber materials.

These pictures show are the different size ,design and color cover which are commonly used in protecting with silicon material via compression molding, it has the shiny or matte surface that can be customized and better touch feeling. You can have different shoreA or shore D hardness upon on your requirement.

The process is better for the mass productions with big volume whatever small or big size product.

Molding process is the use of resin curing reaction in each stage of the characteristics to achieve product molding, that is, the molding material plasticized, flow and filled with mold cavity, resin curing. In the flow process of the molding material filling the mold cavity, not only the resin flow, but also the reinforced material flow, so the molding pressure of the molding process is higher than other process methods, which belongs to the high pressure molding. Therefore, it needs not only the hydraulic press which can control the pressure, but also the metal mold with high strength, high precision and high temperature resistance.

The following factors must be considered when using a compression molding method:

• Material
• Shape
• Pressure
• Temperature
• Part thickness
• Cycle time

With the advancement of computers and technology, it is likely that less manual labor will be required to process the mold. Processes such as adjusting heat and time may be monitored and adjusted by the molding unit directly without human interference. It would not be far-fetched to say that in the future an assembly line may handle all aspects of the compression molding process from measuring and filling the model to removing the product and flash.

	0x800x500mm
Product material	NR, NBR, SBR, EPDM, IIR, CR, Silicone rubber...etc.
Product colors	Pantone code or to sample
Prototype tool L/T	5days for a typical size 150x100x5mm product
Production tool L/T	20days for 20cavity/100x80x10 parts
In house 2nd process	Pad Printing /screen printing/painting/laser engraving/coating
Payment terms	50% deposit,50% balance before delivery
Shipment	Per customer request